Carl Martin DC Factory is an isolated multi-output power supply for pedalboards. It provides up to 2500 mA across ten DC outputs, allowing both analog and digital effects pedals to be powered from a single unit.

• 10 DC outputs with 2500 mA total capacity
• 8 x 9 V outputs and 2 x 12 V outputs
• Five separate, 100% isolated 500 mA power sections
• Switch-mode construction designed to counter radiated noise
• LED status indicator
• Mains connection with fuse

Five isolated power sections

DC Factory is divided into five separate power sections, each providing 500 mA. Four sections deliver 9 V DC and have two outputs each, while the fifth section delivers 12 V DC through two outputs. When two pedals are connected to the same section, their combined current consumption must not exceed 500 mA.

The electrical separation between the power sections helps limit unwanted noise between different types of effects on a pedalboard. The switch-mode technology is designed to provide clean power without radiated hum that can affect wah pedals and some analog drive pedals.

9 V and 12 V outputs

With eight 9 V outputs and two 12 V outputs, DC Factory supports a wide range of common pedalboard configurations. Two DC outputs can be combined with a Voltage Doubler cable to provide 18 V. The cable is not included.

Status and mounting

The front-panel LED indicates power status. DC Factory can be used as a standalone unit or mounted on a pedalboard, and it is compatible with the PedalTrain PT-VDL-MK. Mounting brackets are not included.

Technical specifications

• Type: digital switch-mode power supply
• Mains connection: 100–240 V AC with T1A fuse
• 9 V outputs: 4 isolated and separate 500 mA sections, with 2 DC outputs per section
• 12 V outputs: 1 isolated and separate 500 mA section, with 2 DC outputs
• Total number of outputs: 10 DC outputs
• Polarity: center-positive
• Total available current: 2500 mA
• Protection: short-circuit and overload protection
• Dimensions: 150 x 85 x 45 mm
• Weight: 0.68 kg