Tascam LM-8ST Linje-mikser, 1U-19"

Product nr: 1059447
Tascam LM-8ST Linje-mikser, 1U-19"
6 222,-
-+
Temporarily out of stock
Send an email to post@evenstadmusikk.no for delivery time

View this product description in Norwegian.

 

Line Mixer

 

The LM-8ST is a compact line mixer for installation, studio submixing, keyboardists or anyone who needs a mix of line signal sources. Eight stereo input sources like CD/MP3 players, tuners, instruments etc. can be routed independently to a pair of stereo outputs. For the second output the user can choose between pre and post-fader routing. Input and output level controls and metering keep signals under control. A microphone input is also provided for announcements or performance. Master bus inputs and outputs are available for cascading multiple units.

 

The LM-8ST is housed in a rugged rack-mountable chassis and has a built-in power supply (no AC adapter) for many years of safe and reliable operation.

 

 

  • Line mixer with flexible signal routing
  • Ideal solution for installations in boardrooms, conference rooms, health/fitness clubs, restaurants, houses of worship, as a keyboard or stage sub mixer and more
  • 8 stereo input channels for line sources like CD/MP3 players, tuners, TV or VCR audio signals etc. (balanced TRS)
  • Additional mic/line input with level control for channel 1 on front panel for announcements etc. (balanced XLR)
  • 2 stereo outputs (ST1 and ST2/AUX, balanced XLR / unbalanced RCA)
  • Each stereo input can be mixed to each stereo output independently:
    • ST1: Input signal is sent to ST1 output
    • ST2: Signal before the ST1 level control (pre fader) is sent to ST2/AUX output
    • AUX: Signal behind the ST1 level control (post fader) is sent to ST2/AUX output
    • Switches for ST2/AUX selection per channel on bottom panel
  • Input level selectable between +4 dBu and –10 dBV per channel (on rear panel)
  • Signal presence and overload LEDs on each channel
  • 4-dot LED stereo level meters on each output
  • Each stereo output switchable to mono
  • High-power headphones output with level control and selectable source (ST1, ST2/AUX)
  • Balanced master bus output and input (input selectable between ST1, ST2/AUX and Mix) for cascading of multiple units
  • Ground terminal and ground lift switch on rear panel
  • Easy replaceable fuse
  • 1U rack-mountable chassis

 

Spesifikasjoner

Audio inputs and outputs

Mic input         XLR (balanced)
  Input impedance         2.4 kOhm
  Nominal input level         –58 dBu (1 mV) to –12 dBu (195 mV)
  Maximum input level         +10 dBu (2.45 V)
Stereo inputs         6.3-mm TRS (balanced)
  Input impedance         56 kOhm
  Nominal input level         +4 dBu (1.23 V)
  Maximum input level         +24 dBu (12.3 V)
Master bus input         6.3-mm TRS (balanced)
  Input impedance         56 kOhm
  Nominal input level         +4 dBu (1.23 V)
  Maximum input level         +24 dBu (12.3 V)
ST1, ST2/AUX outputs         XLR (balanced)
  Output impedance         94 Ohm
  Nominal output level         +4 dBu (1.23 V)
  Maximum output level         +24 dBu (12.3 V)
ST1, ST2/AUX outputs         RCA (unbalanced)
  Output impedance         200 Ohm
  Nominal output level         –10 dBV (0.3V)
  Maximum output level         +10 dBV (3.16 V)
Bus output         6.3-mm TRS (balanced)
  Output impedance         94 Ohm
  Nominal output level         +4 dBu (1.23 V)
  Maximum output level         +24 dBu (12.3 V)
Headphones output         6.3-mm TRS (stereo), 3.5-mm TRS (stereo)
  Maximum output power         250 mW + 250 mW (at 32 Ohm)

 

Audio performance

Frequency response         20 Hz–50 kHz, ±3 dB (PHONES outputs)
10 Hz–100 kHz, ±3 dB (BUSS output)
S/N ratio         =80 dB(A) (PHONES outputs, 20 kHz LPF)
=80 dB(A) (BUSS output, 20 kHz LPF)
THD         =0.07% (PHONES outputs, when outputting 100 mW + 100 mW (32 Ohm), 20Hz HPF and 20 kHz LPF)
=0.03% (BUSS output, 20 Hz HPF and 20 kHz LPF)
Channel separation         =50 dB(A) (PHONES outputs, 20 kHz LPF, 1 kHz nominal input and output, 32 Ohm termination)
=70 dB(A) (BUSS outputs, 20 kHz LPF, 1 kHz nominal input and output, 600 Ohm termination)
Crosstalk         =65 dB(A) (BUSS outputs, 20 kHz LPF, 1 kHz nominal input and output, 600 Ohm termination)

 

Power supply and other specifications

Voltage requirements         AC 100–240V, 50–60 Hz
Power consumption         15 W
Dimensions (WHD)         482 mm x 44 mm x 280 mm
Weight         3.8 kg
Operating temperature range         5–35 °C
Included items         Power cord, Rack-mounting screw kit, Warranty card, Owner’s manual

Product information

Mixer - Bluetooth connection No
Mixer - Built in USB interface No
Mixer - Built-in reverb/effects No
Mixer - Number of channels 8
Mixer - Number of mic pres 0