Celestion NTR10-2520D T5638AWD 8R

Product nr: 1023396
Celestion NTR10-2520D T5638AWD 8R
2 450,-
-+
Must be ordered. Product in stock at our supplier
Can be sent from our warehouse by
5/10/2024
A partial payment must be selected at checkout
Monthly fee Number of months Eff. rate Total Cost A partial payment assumes conclusion of the credit agreement with Santander with credit card after a credit rating.

View this product description in Norwegian.

 

Features:

  •  10" neodymium mid/bass unit offers 250Wrms (AES standard) power handling and
  • 96dB sensitivity
  •  2.5" high temperature Inside/Outside voice coil efficiently dissipates heat,
  • preventing sensitivity loss through thermal compression
  •  "M-roll" surround provides progressive excursion control, yielding a smooth
  • response even at extremes of frequency range
  •  Extremely lightweight design combined with a highly efficient magnet assembly
  • results in exceptional power-to-weight ratio
  •  Intelligent heat management in both chassis and magnet assembly design further
  • minimises distortion


General Specifications:

  • Nominal diameter: 254mm/10in
  • Power rating: 250Wrms
  • Nominal impedance: 8 Ohm
  • Sensitivity: 96dB
  • Frequency range: 55-3500Hz
  • Voice coil diameter: 64mm/2.5in
  • Chassis type: Cast aluminium
  • Magnet type: Neodymium
  • Coil material: Copper clad aluminium
  • Former material: Glass fibre
  • Cone material: Kevlar loaded paper
  • Surround material: Cloth sealed
  • Suspension: Single
  • Xmax: 4mm/0.16in
  • Gap Depth: 8mm/0.32in
  • Voice coil winding width: 16mm/0.63in

Small Signal Parameters:

  • D: 0.21m/8.27in
  • Fs: 56.7Hz
  • Mms: 40.22g/1.42oz
  • Mmd: 36.57g/1.29oz
  • Qms: 2.763
  • Qes: 0.411
  • Qts: 0.358
  • Re: 6.11O
  • Vas: 33.28lt/1.17ft3
  • BI: 14.6Tm
  • Cms: 0.196mm/N
  • Rms: 5.184kg/s
  • Le: (at 1kHz) 0.55mH

Mounting Information:

  • Overall diameter: 260mm/10.24in
  • Overall depth: 113mm/4.45in
  • Cut-out diameter: 232mm/9.13in
  • Mounting slot dimensions: 7.5mm x 6.5mm/0.3in x 0.26in
  • Number of mounting slots: 4
  • Mounting PCD range: 244-247mm/9.6-9.7in
  • Unit weight: 2.2kg/4.89lb