The Mooer GE250 is a guitar multi-effects processor with 70 amp models from the Micro Preamp series, 32 factory IR-based speaker cabinet models and support for third-party impulse responses. Its Tone Capture function can sample the sound of a real amplifier, while the flexible footswitch configuration and extensive I/O provide detailed control for practice, recording and performance.
Amps, cabinets and effects
- 70 amp models from the Micro Preamp series
- 32 factory IR-based cabinet models designed to emulate the sound and feel of a real tube amplifier
- Supports third-party impulse responses with 2048 sampling points, stored in 10 free user presets
- More than 180 high-quality effects
- Up to 11 effect types can be used simultaneously
- Tone Capture function for sampling the sound of your own amplifier
- Trail On function for delay and reverb effects provides natural decay when the effect is switched off
- Programmable FX loop with optional signal-chain routing
- Tap Tempo function
Control and features
- 255 preset patches in 85 preset banks
- 70-second stereo phrase looper
- 60 drum rhythms and 10 metronome options
- Built-in tuner
- Integrated expression pedal
- Programmable footswitch
- Up, Down, A, B and C footswitches
- Control buttons for Rhythm, Display, GLB-EQ, CTRL, System, Save and EXP
- Effect control buttons for FX A, DS/OD, Amp, Tone Cap, Cab, NS, EQ, FX Loop, FX B, Delay and Reverb
- Value rotary switch for menu navigation
Connections and USB audio
- 6.3 mm mono input jack
- 6.3 mm stereo EXP input jack for external expression pedals
- 3.5 mm stereo AUX input
- One 6.3 mm mono Send jack and one 6.3 mm mono Return jack
- Two 6.3 mm mono output jacks (L/R)
- 3.5 mm stereo Phones output
- Two balanced XLR outputs (L/R) with switchable Ground Lift
- 5-pin MIDI In/Out
- USB-B connection for PC/Mac
- Professional USB AUDIO solution with a dedicated ASIO driver for low-latency recording
- Separate master controls for the XLR Out and Output/Headphone outputs
Specifications
- Aluminium housing
- 3.5-inch TFT display
- Powered by the included 9V DC adapter with a 2.1 x 5.5 mm barrel plug and centre-negative polarity
- Battery operation is not supported
- Current draw: approx. 1,000 mA
- Dimensions (L x W x H): 324 x 162 x 60 mm / 12.76 x 6.38 x 2.36 inches
- Weight: 1.7 kg / 3.75 lbs
- Includes power adapter and USB cable
Note: Firmware updates are a sensitive process and must be carried out with particular care. Follow all instructions exactly. Performing an update incorrectly can cause irreparable damage and invalidate the warranty.