EarthQuaker devices Plumes™

Small Signal Shredder Overdrive Pedal

Product nr: 1137822
EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal EarthQuaker devices Plumes™ Small Signal Shredder Overdrive Pedal
1 607,-
-+
Must be ordered. Product in stock at our supplier
Can be sent from our warehouse by
12/2/2026
Notify me

EarthQuaker Devices Plumes is a low- to medium-gain overdrive pedal based on the legendary green overdrive circuit that has been an industry standard for decades. Combined with a good tube amp, the Plumes produces warm, transparent saturation. Instead of the familiar JRC4558 op amp and BJT buffers, it uses low-noise JFET op amps for a more robust, precise signal with a significantly lower noise floor.

With a 10-megohm input impedance, the Plumes delivers a stronger signal with greater clarity and chime. The tone control has been adjusted for a more useful range, providing fuller low-end bass without sacrificing the cutting midrange and bright top end.

Three selectable clipping modes allow the Plumes to work with a wide range of equipment and playing styles. Mode 1 uses symmetrical clipping based on a pair of LEDs and is the pedal's crunchiest setting. Through a clean amp, it delivers a classic crunchy valve-amp tone. Mode 2 is a clean boost without soft clipping and with direct op-amp drive, ideal for pushing a clean tone forward or driving the preamp of an already overdriven amp into breakup saturation. Mode 3 uses an asymmetrical silicon-diode arrangement like an original screamer, but with more output and clean clarity.

The Plumes features EarthQuaker Devices' relay-based “soft touch” Flexi-Switch Technology, supporting both momentary and latching footswitch operation.

Features

  • Low- to medium-gain overdrive effects pedal
  • Three selectable clipping modes: symmetrical LED clipping, asymmetrical silicon clipping and no-diode op-amp drive
  • Improved tone control for sculpted low end, clear top end and focused midrange
  • Works with electric guitars, basses and synths
  • Silent relay-based “soft touch” switching for both momentary and latching footswitch operation
  • True bypass
  • Level, Tone and Gain controls
  • Three-way toggle switch for selecting the clipping mode
  • Bypass footswitch
  • Status LED
  • Metal housing
  • 6.3 mm mono input and output jacks
  • Power via an optional 9V DC adapter with a 2.1 x 5.5 mm barrel plug, centre-negative polarity
  • Battery operation not supported
  • Current draw: 25 mA
  • Dimensions (D x W x H): 117 x 64 x 57 mm
  • Weight: 396 g